Fuel System
| Component | Size |
| Hard Source Line (inc. Sender Flex Pipe) | 5/16″ / 8mm OD |
| Hard Return Line | 1/4″ OD |
| Rear Connections (to Soft Line) | M14x1.5 |
| Front Connections (to Filter) | M12x1.25 |
| Front Connection (to Fuel Pressure Regulator) | TBD |
| Front Connection (to Hard Return Line) | TBD |
Oil System
| Component | Size |
| Pressure Sensor (Gauge) | 1/8″ BSPT |
| Pressure Switch (Dummy Light) | 1/8″ BSPT |
| Rear Turbocharger CHRA Feed | M10x1.25 |
| Rear Turbocharger Reducer Feed | M12x1.0 |
| Connection to Oil Filter Housing | M16x1.5 |
| Connections to Oil Cooler | M16x1.5 |
Coolant System
| Component | Size |
| Turbocharger Coolant Feed & Return | M12x1.25 |
| Connections to Heater Core | TBD |
| Connections to Throttle Body | TBD |
| Connections to Thermostat Housing | TBD |
Power Steering System
| Component | Size |
| Connection to Power Steering Pump | TBD |
| Connection to Power Steering Rack (Input) | TBD |
| Connection to Power Steering Rack (Output to Rear) | TBD |
| Connection to Rear Steering Rack | TBD |
Clutch System
| Component | Size |
| Connection to Clutch Master Cylinder | M10x1.0 Inverted Flare |
| Connections to Clutch Damper | TBD |
| Connection to Clutch Slave Cylinder | TBD |
| Clutch Bleeder Valve | TBD |
Brake System
| Component | Size |
| Connection to Brake Master Cylinder | TBD |
Connection to Proportioning Valve /
Anti-Lock Brake System Pump | TBD |
Connection to Upper Soft Line
(Wheel Well) | TBD |
Connection to Lower Soft Line
(Wheel Well) | TBD |
| Connection to Caliper | TBD |
| Brake Bleeder Valves | 7mmxTBD or 10mmxTBD
(Year Dependent) |
Vacuum System
| Component | Size |
| Blow Off Valve Trigger | 4mm ID Hose |
| Clutch Vacuum Assist | TBD |
| Brake Vacuum Assist | TBD |
| All Other Vacuum Lines | 3mm ID Hose |
Air Intake System
Ports and barbs are sized for tight fitting silicone caps (OD) or plugs (ID). Connections sized for hose clamps.
| Component | Size |
| Port for Blow Off Valve Recirculation | 40.5mm OD, TBD ID |
| Port for Boost Control Solenoid Return | 10.7mm OD, TBD ID |
| Port for Positive Crankcase Ventilation Return | TBD OD, 10.5mm ID |
| Barb for Positive Crankcase Ventilation Return | TBD OD, TBD ID |
| Port for Evaporative Control Return | TBD OD, TBD ID |
| Barb for Evaporative Control Return | 10.7mm OD, 10mm ID |
| Bubble Pipe Connection to Blow Off Valve | 44.5mm |
Connection from Bubble Pipe /
Naturally Aspirated to Mass Airflow Sensor | 330mm |
| Connection from Bubble Pipe to Pre-Turbo Pipes | 72mm |
| Connection Between Naturally Aspirated Sections | 95mm |
| Connection from Naturally Aspirated to Air Box | TBD |
Connection from Pre-Intercooler Pipes to
Front Turbocharger / Rear Hard Pipe | TBD |
| Connection from Pre-Intercooler Pipes to Intercoolers | TBD |
Connection from Rear Post-Intercooler Pipes to
Small Hard Pipe Near Fans | TBD |
| Connection from Post-Intercooler Pipes to Y Pipe | 56mm |